IDB Series electric water pump

Vortex pump clean water Power: 0.5-1hp Q.max: 35-45L/min Head: 36-50m

IDB Series electric water pump 

Applications and installation

These pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves.

For the correct functioning of the pump, use to pump clean water, or non-aggressive liquids only, without sand or other solid impurities.

They are qualified in domestic fitting, to increase the system pressure in aqueducts and for automatic water distribution by auto calve tanks and by hydrosphere units.

Pumps should be installed in a covered area, protected against the weather.

Operating limitations

Liquid temperature up to 60°C

Ambient temperature up to 40°C

Total suction lift up to 9m

Continuous duty

Construction features

Pump Body: Cast Iron

Impeller: Brass

Mechanical Seal: Carbon / Ceramic / Stainless Steel

Motor Housing: Aluminum

Shaft: Carbon Steel / Stainless Steel

Insulation: Class B / Class F

Protection: IP44 / IP54

Thermal protector (if required)

TECHNICAL DATA

Type InputPower Current(A) Capacitor(μF) H.max(m) Q.max(I/min) Size(inch) S.Head(m) Total head (m) Capacity I/min KW HP 10 20 25 30 35 40 50 60 IDB35 0.37 0.5 1.5 8 36 35 1"×1" 9 22 14 18 6         IDB40 0.50 0.6 2 10 45 45 1"×1" 9 31 21 16 11         IDB50 0.75 1 3.7 16 50 45 1"×1" 9 40 30 24 18 11 6

IDB Series electric water pump